中文版




News

Update Notice (2013/11/28)

In this new version, we did 4 modifications. 1. New Shape for you to choice.....see more


Update Notice - Speed Up Output Time (2013/11/11)  

In this new version, you can save 20~40% outputting process time for any same size .....see more


Update Notice - Mask Matrix function (2013/10/30)  

In old vertion, you need to key in all information of mask one by one for each LED. For large size LGP, it would be the loading undoubtedly. Now we created the "Matrix" function to reduce this loading......see more


Update Notice - New Edit Method for CustomeShape in Masks-Block (2013/10/15)  

In old vertion, you need to key in values to define your special shape, and that is hard to imagine the final profile based on lots of numbers...Therefore, in this new version, we create a real curve in edit window. it will be helpful for you to design the curve you want!.....see more


Update Notice - User Define Curve for density adjustment (2013/10/01)  

The most difference in this new version is that custom can define the adjusting density curve by themselves. Comparing with old version, the design procedure will become simpler and more flexible.....see more


New Version release-Laser Engraving route improvement (2013/09/10)

This new version improves laser procedure for Horizon/Vertical/Cross line output of Same Pitch Output and will save 1/3 engraving time!.....see more


New Same Size Output-Fine Grained 3 Release (2013/08/21)  

New Same Size Output-Fine Grained 3 is improved for image and light guide plate output both. For Image output, we modify the dot distribution method and create multi-segment setting to let shape more vivd!.....see more


August 05, 2013

New Line Output Released for Laser Engraving.
New Line Output Released (Setting Description)


April 18, 2013

Engraving Lite Released.


Feb 27, 2013

BacklightFly 4.6 Released.


July 29, 2007

Febees Backup 1.5 Updated

 







News (more)

Novemer 28, 2013
Update Notice

Novemer 11, 2013
Update Notice - Speed Up Output Time

October 30, 2013
Update Notice - Mask Matrix function

October 15, 2013
Update Notice - New Edit Method for CustomeShape in Masks-Block

October 01, 2013
Update Notice - User Define Curve for density adjustment

 

BacklightFly
 
Manual
Installation Guide
Step 1:Quick Start Guide
Step 2:Mask Block
Step 3:Polar Coordinate
Who needs BacklightFly
BL Output Example
BL Design—Density ABC 
BL Design—FeedBack ABC 
BL Design—Output
It's all about Density
Application
Multi-layer 
Mask-Exclude (keypad) 
Mask-Imge (Lamp design)